Motherboard Didn’t Come With Screws (What To Do)

You’ve purchased an upgrade to your motherboard and are looking to make the upgrade, only to discover that there aren’t any screws inside the packaging. Are these issues normal? Or do you need to return the motherboard and request a refund?For one thing, you shouldn’t attach your motherboard without the required screws.

There’s nothing to be concerned about since it’s a common issue and can solve easily.

Motherboards Didn’t Come With Screws (What to do?)

If your motherboard wasn’t equipped to complete with screws can purchase new ones on the internet.

It is also possible to use screws that came from older computers since there aren’t all holes on motherboards that have to be screwed to hold them in their place.

Let’s examine these options more in-depth.


1. Purchase New Screws

When you purchase a fresh motherboard, it’s a good likelihood that it won’t come with brand new screws.

However, it is dependent on the manufacturer whether they include tools and bits or not.

The reason for this is that motherboards are extra hardware pieces that can be connected to the chassis.

These screws should be part of the case and not on the motherboard.

If you don’t have screws for the case you’re in, then may buy them on the internet.

The first step is to determine what kind of screws you’ll require, and which will work with your particular unit.

Everyone thinks about the compatibility of their hardware before buying an upgrade to a motherboard.

For instance, the includes ATX, Mini ATX, and MicroATX determine the type of screws, the numbers, and configurations of screws.

So, the motherboard you purchase to fit your case will be suitable for use with the screw that is on the case.

The right kind of screws for motherboards could be difficult because different screws are needed to attach the motherboard (more on this later).

Refer to the user’s manual of the motherboard and determine what kind of screws are needed.

Also, make sure that the screws will fit into the holes of the case.

But, there’s not much to be worried about except for a specific situation.

If you are unable to find details on the kind of screws you require to use, then you should consider the PC screw kit which offers a broad range of screws required to fit various PC components.

You will likely discover compatible models inside this kit.

If you choose to purchase screws replacement from an online store then you can bring an original motherboard, and request them to provide the appropriate screws.

Before putting in the screws, make sure you check the threading as well as the size of the screw to make sure that they are seated correctly.


2. Use old screws

If you own an older PC case or motherboard you could use the original screws, as most of the standard motherboards and cases use the same screws.

There’s no need to be concerned about putting the screws on correctly.

They’re either fit, or they do not.

It is easy to check whether the motherboard is securely connected to the case and ensure that nothing is loose.

The only thing you need to be aware of is how long the screw will be, to ensure it is inserted completely in.

You can even use different kinds of screws so long as they are firmly fitted.

Typically, the screw holes on motherboards feature white or yellow circles that depict the safe screw head size.

If the screw is tight and the head isn’t larger than the circle that has been marked.

What Type of Screws Do You Usually Need for Motherboards?

As previously mentioned motherboards require different kinds of screws to install them.

In this way, it is important to determine whether all screws will work for your computer and the case.

Here’s what you should be aware of:

1. Standoffs

are screw-like objects that function as a spacer between the motherboard and the casing of the box.

Like the name implies they don’t hold the motherboard in the right place.

There will be electric shorts but no stoppages because the motherboard can transfer the power it receives from other parts made of metal.

The standoff appears like a screw that is inserted through the mounting holes on the motherboard.

They’re generally hexagonal and can be made from metal or plastic.

They usually are #6-32 UNC thread that requires an #1 or #2 Philips screwdriver to connect them.

However, it’s best to read and refer to the manual for users before buying standoffs.

While most standoffs can be used in a variety of ways, they could require different sizes or types depending on the motherboard’s manufacturer as well as its design.

There is a variety of standoffs on motherboards.

Certain of them feature gender-neutral threads on the opposite side.

The male threaded ends go through the hole in the case. The female end connects to the motherboard with a screw.

Metal standoffs provide spacing and secure agents, whereas plastic standoffs usually don’t ensure the motherboard is secured.

These standoffs are essential components to connect your motherboard.

The only way you won’t require these standoffs is if they’re preinstalled in the case.

Certain computers come with exclusive standoffs that are hard to locate in the marketplace.

In these situations, the manufacturer will provide these with an appropriate case.

Keep them in case you decide to upgrade your motherboard so that they can be used with the new motherboard.


2. #6-32 UNC Screws

Because the majority of motherboard standoffs are #6-32 UNC kind, you’ll need the correct screws to secure them.

These are the standard machine screws typically used to secure components and panels, such as motherboards.

It is possible to utilize 5/16 or 3/16 long screws however it is the smaller screw that version is more popular.


3. M.3 Screws

The M.3 5 type is another screw you could buy to attach your motherboard if you do not already have the #6-32 UNC screw.

The length and size (5 millimeters long) are standard for all standoffs.

On certain motherboards, you might be able to utilize M.2 or M.4 screws, too.

If you do not already have the #6-32 UNC or M.3 screws, you can look at these screws to determine if they will fit.

Alongside the screws to fix the motherboard to your case, you’ll also require different screws to connect other components to the motherboard.

The most significant ones are:


A. Thumbscrews

They are generally 7.5 millimeters in length and come with large knurled heads that have grips for the heads to use with screwdrivers.

The knurled head makes it simple to secure or loosen them using your fingers.

These screws are required to secure the side panels of the case.


B. M.5 10

You’ll require these screws for attaching your fans onto the chassis.

They could be included inside the computer case or be included in the fan in the case.

They have flat heads, which are Philips No. 2 type.


C. M2Sscrews

Small screws are used to attach SSD cards.

The motherboard you have maybe equipped with screws that are fastened within the holes.

Tips to Consider When Selecting Screws

Standoffs and screws must match as screws are used to attach standoffs and secure the motherboard.

If they aren’t compatible the same way, you won’t be able to establish an effective and secure connection, which could lead to damage to your motherboard.

While the majority of motherboards have identical screw and standoff types but you must always refer to your manual for use because certain motherboards have special designs that don’t match normal screws.

When you install the motherboard you must first connect the standoffs before securing them by screwing M.3 screws into them.

Make sure that the screws fit easily and without resistance. get into.

However, screws that aren’t long may cause damage to your motherboard, which is why it is essential to double-check the correct screw before installing your motherboard.


Do I Have To Connect the entire Motherboard Holes?

The motherboard is an extremely sensitive computer component and needs to be set up by strict security procedures.

If you don’t install the motherboard properly it could squeak and come into contact with the metal components of the case, which can lead to electrical shorts that can destroy the motherboard.

It can also be bent when you insert objects through the I/O ports.

You must ensure you’ve screwed the holes properly to prevent any injury.

The majority of motherboards feature nine holes that are arranged on the four sides and in the middle.

If your motherboard isn’t equipped with screws, and you wish to use the screws you have from your previous motherboard they may not be enough screws to cover all holes.

A few users have suggested it’s not necessary to screw in all holes in the same way, as just screwing the major ones is sufficient.

However, it’s best not to do anything without a plan because of the significance of this element.

Some believe that having those standoffs up is sufficient and that you only have to screw the most significant ones, leaving the others.

It is important to have gaps between the mobo as well as the casing in every location.

This is the reason why installing all standoffs is more important than screw installation.

If you’re using too few screws, put screws in areas with large components or along the edges of the panel where they are touching the sides of your panel.

In this way, you’ll stop the motherboard from rattling and stretching as you connect peripherals.

The screw at the top is essential as it is the location of CPU cooling. directly on top of the motherboard. The motor’s movements could cause motherboard connections to break.

You could remove that one on the right-hand side since there aren’t any bulky components or pressure to put peripherals into the area.

In general, it’s best not to be a victim of unusual issues due to weak connections, it’s better off securing all your places.


How Do I Install the Motherboard Standoffs onto The Case

After determining which standoffs work best on your motherboard and buying the standoffs (or just using the existing ones that came with your case) is the now time for them to be connected to your case.

There are holes pre-drilled on the case, however, they’re not necessarily aligned the same way as the ones on motherboards.

So, you must choose which holes to utilize.

Before connecting the mobo and the base plate you should mark precisely the places where the holes need to coincide.

You can outline by placing the motherboard on square paper and then marking the holes for standoffs.

Then, put it on top of the base plate, and place it in the holes.

Set the standoffs onto the case and secure them with screwscrews.

Once you have aligned the holes on the motherboard to the holes on the case, put the motherboard in the base plate, then secure the standoffs using screws.

At the final stage, each of the ports on the motherboard must be secured by screwing standoffs into the base plate.

Start by focusing on the corners and edges to fix the mobo, and then move to other holes.

After you’ve made sure that the motherboard is securely attached to the case you can connect other components as per the guidelines of the manufacturer.

No matter which motherboard brand or model you own, you must adhere to certain safety precautions to ensure you don’t hurt yourself or ruin your motherboard.

Here’s how:


1. Ground Yourself

Because you’re dealing with electronic components, it is important to be aware of safety precautions, even if you don’t have any electrical components connected.

You can get grounded by touching something that is made of metal within the case.

However, if you’d like to be extra careful then you can wear the rubber glove as well as an anti-static bandage to prevent harming your motherboard.


2. Be Careful with The Motherboard

When installing the motherboard, it is essential to hold it off to the side and stay clear of touching the sensitive circuitry.

Be careful not to use too much tension when fixing the motherboard. Also, apply equal pressure to every part and corner.

It is also recommended to not secure the corners tightly before drilling the next hole.

That is, you need to ensure that each corner is secured with enough force that the motherboard isn’t able to move. Finally, tightly fasten all screws at the end of the process.


3. Make sure you avoid electrical shorts

As stated, the use of standoffs is vital to prevent short circuits.

In general, it is best to avoid any item that could cause the motherboard to contact the case, which could damage your motherboard components.

If you spot any contact points Reinstall the motherboard, and make sure you take care of the connections and cables.

Cleanse the case thoroughly before connecting the motherboard as dust and dirt can create short circuits.

Pay attention to the location where the standoffs are attached.

If you’ve got a standoff that isn’t connected to your case, then you’ll get electrical shorts.


Commonly Asked Questions about Motherboard Screws


1. Do Motherboard Standoffs Need to Be Used?

Standoffs on the motherboard aren’t essential to ensure the correct functioning of the PC.

It is possible to install your motherboard in a case that is not enclosed and your computer will perform perfectly.

However, you shouldn’t put your motherboard into the case without standoffs or you’ll run the risk of electrical shorts, which could cause damage to your motherboard or even your CPU.


2. Does Every Motherboard Screws the Same?

The majority of motherboard screws are identical because they’re standard.

The sizes, however, differ based on the form factor of the motherboard in that ATX motherboards come with different screws compared to MATX kinds.

Additionally, certain manufacturers may also have distinct designs, so it is important to be aware.


3. Do you require washers to Connect The Motherboard to The Case?

You don’t require any washers for attaching an enclosure to your motherboard.

The M.3 and #6-32 UNC screws that are commonly used for mounting the motherboard are equipped with a metal washer that is designed to conduct electricity.

If a washer were required then the manufacturers would have to include it.


4. Why do Motherboards Do Not Include Screws?

Motherboards typically don’t come with screws since the screws are attached to the enclosure, but not to the motherboard.

Each case has holes that are occupied by standoffs and screws.

It’s not logical to provide screws for the motherboard, only to discover that it’s not compatible with your case.

Add a Comment

Your email address will not be published.